FSR CB-BRK-1G/2G/6IPS/12IPS - Manual

FSR
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
44033 LIT1377
(2) #7-16 NEEDLE-POINT SCREW
LOCATE ACCESSORY INTERNAL
BRACKET AS REQUIRED OR
USE EXISTING PILOT HOLES
CARRIAGE SHOWN IN "DOWN" POSITION
TO ILLUSTRATE BRACKET INSTALLATION
AND PILOT HOLES
ACCESSORY INTERNAL BRACKET
(CB-BRK-1G SHOWN)
OR
WIRE
SADDLE
CABLE TIE
CB-BRK-1G/2G/6IPS/12IPS ACCESSORY INTERNAL BRACKET INSTALLATION INSTRUCTIONS
1. INSTALLATION AND WIRING OF ELECTRONIC
DEVICES ONTO THE ACCESSORY INTERNAL
BRACKET MAY BE DONE BEFORE OR AFTER
SECURING BRACKET INTO CEILING BOX.
2. SECURE ACCESSORY INTERNAL BRACKET TO
CEILING BOX WITH SUPPLIED HARDWARE AS
SHOWN. BRACKET LOCATION TO BE
DETERMINED BY CUSTOMER/ELECTRICAIN.
BRACKET CAN BE MOUNTED USING FACTORY
PILOT HOLES OR BY ADDING ADDITIONAL
HOLES.
3. SECURE WIRING AS REQUIRED WITH WIRE
SADDLES OR CABLE TIES ONTO ACCESSORY
INTERNAL BRACKET AS SHOWN.
SNAP WIRE SADDLES IN
PLACE OR USE CABLE
TIES AS REQUIRED TO
SECURE ANY WIRING.