FSR SS-USB-CHRG-PS6 - Manual

SS-USB-CHRG-PS6
Distribution for FSR’s
DC Powered USB Chargers
FSR Inc.
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 · Fax: 973.785.4207
Order Desk: 1-800-332-FSR1
Web: www.fsrinc.com · E-mail: [email protected] LIT1483
43054
Power Products Group
SS-USB-CHRG-PS6
FEATURES FEATURES
COMPATIBLE DC CHARGER PLATES
DESCRIPTION DESCRIPTION
• 1-RU (1.75”) high, low-voltage distribution board
• Two mounting holes are provided to attach to the
rear rack rails in a rack
• Rear of PCB should be covered (black foam tape
may be used)
• All connections are via captive-screw terminals
• Power supply is included to handle up to 6
remote FSR DC Powered USB Chargers.
• On-Board LED power indicator
• Inexpensive solution for remote USB power
distribution
The SS-USB-CHRG-PS6 is a remote power
solution for the FSR IT-USB-CHRG,
SS-USB-CHRG and IPS-D717S DC Powered
USB Chargers; It consists of a rack mounted
board to remotely power up to six (6) DC
Powered USB Chargers and a 15 VDC@ 6 A
power supply with AC power cord. The unit
provides an inexpensive means of neatly
distributing USB power from an included single
power supply, eliminating the need for multiple
AC wall adapters and messy overloaded power
strips.
AWG MAXIMUM LENGTH (FT.)
22 60’
20 90’
18 140’
NOTE: Maximum length limits may be doubled if
using only five SS-USB-CHRG chargers or if a
maximum of five will be loaded at the same time.
IT-USB-CHRG
· Wall Plate DC to USB charger
SS-USB-CHRG
· Keystone DC to USB charger
IPS-D717S
· IPS DC to USB charger
Photos and illustrations are not to scale.