FSR CB-12 / CB-12P ELECTRICAL HOOKUP INSTRUCTIONS User Manual
FSR Equipment
Advertising
Page 1 of 4
43185 LIT1417
ELECTRICAL HOOKUP INSTRUCTIONS FOR CB-12 / CB-12P
CEILING BOX
WARNING: ENSURE BRANCH CIRCUIT POWER IS DISCONNECTED BEFORE
INSTALLATION.
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE AND ARE
NOT MEANT TO SUPERSEDE NEC OR LOCAL ELECTRICAL CODES.
INSTRUCTIONS FOR CONNECTION TO A 15 AMP BRANCH CIRCUIT:
1) A bag of parts, as shown below, is provided with each housing.
BAG OF PARTS INCLUDED WITH HOUSING
2) Remove the electrical box cover by removing the two retaining screws as shown in
Figure 1.Save all parts for later reassembly.
Figure 1
244 Bergen Blvd. Woodland Park NJ 07424 973-785-4347 www.fsrinc.com
Advertising