FSR TS-400 - Manual (Page 6)

3. INSTALL COVER ONTO CHASSIS. MAINTAIN TENSION
ON SAFETY CABLE WHILE POSITIONING COVER TO
CHASSIS. REVERSE STEPS TO REMOVE COVER FROM
CHASSIS.
SUPPORT COVER AT
THESE LOCATIONS
MAINTAIN TENSION ON
SAFETY CABLE WHILE
MOVING COVER UP
TO CHASSIS
BOTTOM OF COVER
WHILE KEEPING TENSION
ON SAFETY CABLE, ENSURE
BOTTOM SURFACE OF COVER
IS PARALLEL WITH TOP
OF CHASSIS
ONCE COVER STOPS AGAINST CHASSIS,
WHILE PUSHING UP, (a.) SLIDE COVER
TOWARDS WALL UNTIL IT STOPS AND
(b.) ALLOW COVER TO DROP DOWN
APPROXIMATELY 1/8" TO INTERLOCK
WITH CHASSIS.
a.
b.
TOP OF CHASSIS
SEE LOCK DETAIL
LOCK DETAIL
UNLOCKED POSITION LOCKED POSITION