GAI-Tronics 10370-701 VoIP Interface/Amplifier Assemblies User Manual
Page 17
Pub. 42004-463A
Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies
Page 15 of 23
f:\standard ioms - current release\42004 instr. manuals\42004-463a.doc
09/13
In the Network Configuration page, enter the parameters WLCH, WSTO, WLK1, WLPP and WLSI.
Other settings need not be entered.
WLCH is the Wireless LAN Channel.
WSTO is the Wireless Security Type. The following are the choices:
Table 3. Wireless Security Type Choices
WSTO Setting
Wireless Security Type
0 NONE
1 WEP-64
2 WEP-128
3 WPA
4 WPA2
WLK1 is the WEP key. It is ten HEX characters for WEP-64 or 26 HEX characters for WEP-128.
If NONE, WPA or WPA2 are used, leave blank.
WLPP is the Wireless LAN WPA Passphrase. If NONE, WEP-64 or WEP-128 are used leave blank.
WLSI is the SSID of the Access Point you connect to. This entry is case sensitive.
After entering parameters, press “SUBMIT” button to save configuration. Now the VoIP PCBA can be
accessed through the wireless network for configuration.