GAI-Tronics 10370-701 VoIP Interface/Amplifier Assemblies - Manual (Page 9)

Pub. 42004-463A
Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 7 of 23
f:\standard ioms - current release\42004 instr. manuals\42004-463a.doc
09/13
General Information
Product Overview
The Model 10370-70x series VoIP Speaker Interface/Amplifier Assembly enables broadcasting to
personnel throughout a facility over an existing network via an external speaker(s) or connection to a
central amplifier speaker system. The Model 10370-80x series VoIP WiFi Speaker Interface/Amplifier
Assembly provides the same capability as the Model 10370-70x series but allows connection to an
existing wireless network. The interface/amplifier assemblies can easily be added to an existing network
(10/100 baseT Ethernet) or wireless network (IEEE 802.11 b/g) with minimal cost or effort.
The -701 and -801 series speaker interface/amplifiers include an integrated speaker amplifier circuit that
can supply up to 30 watts of output power to an existing 8-ohm speaker or combination of speakers
equaling 8 ohms. The ability to utilize any speaker or horn/driver combination allows selection of
speakers that meet the coverage and environmental requirements of a specific area. The -702 and -802
series interface/amplifiers also include an integrated speaker amplifier circuit but will instead provide a
70.7 or 100 V, 25-watt output, eliminating the need for a separate central amplifier for a smaller system
applications.
For additional design flexibility, each interface/amplifier assembly also includes a 600-ohm, 0 dBm audio
output. This output can be connected to the audio input of a central amplifier or any equipment that
requires a 600-ohm audio input.
Each VoIP or VoIP WiFi Speaker Interface/Amplifier is capable of providing two dry contact type A
(normally open) outputs. Each output is programmable for a variety of use such as activation of a strobe
in a high noise area or initiating a door latch remotely.
The GAI-Tronics VoIP and VoIP Speaker Interface/Amplifiers provide the flexibility to address a diverse
range of applications. A wide variety of functions can be achieved by altering the configuration data
stored in the non-volatile memory. The configuration options include:
 Web page configuration
 Configuration file
 Command Line Interface (CLI)