GAI-Tronics XCP0100A 4-Channel Expansion Kit User Manual

Confidentiality notice, General information, Field installation kit instructions

Advertising
background image

Pub. 43003-021E

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374

 800-492-1212  Fax: 610-796-5954

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ® C O R P O R A T I O N

A H U B B E L L C O M P A N Y

Model XCP0100A 4-Channel Expansion Kit

Field Installation Kit Instructions

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The Model XCP0100A 4-Channel Expansion Kit expands the total number of channels in the ICP9000
CommandPLUS Series Console or the ICPN9000 Navigator Series MCU by four additional channels.
This kit includes the following components:

Qty Description

1

CP-CSD Slave PCBA

1

CP-CLP Slave Unit Suppression Circuit PCBA

1

CPSLAV2J EPROM (needed for backward compatibility only)

1

CP-LP-GND-JPR Surge Protection Ground Cable

10

#4-40

 ¼-inch Phillips screws

1

SLV-CBL-M Interconnecting Cable (for Master PCBA-to-CSD PCBA)

1

SLV-CBL-P Interconnecting Cable (for CSD-to-CLP PCBAs)

1

CP-CBL-I/O Console I/O Cable (10-foot)

1

Envelope containing “Motorola Brand Hardware”:

 #4-40 standoffs (qty. 3)
 #4-40  5/16-inch screws (qty. 3)
 #10-32  1 ½-inch screw
 #10 washers (qty. 2)
 #10-32 nut
 #10-32 standoff
 #4-40  3/16-inch screws (qty. 3)
 M3  6mm screws (qty. 6)
 #4 washers (qty. 6)

Advertising