Genee World G Touch User Manual
Page 6
04
Basic Operations
Power On
•
Power the Touch LED Display with 100~240V 50/60Hz AC
•
Turn on the ship form switch on the bottom of the Touch LED Display (beside
the power interface) to power on (the indicator light is red)
•
Press “Power” on the Touch LED Display or “Standby” on the remote control
to switch on the Touch LED Display (the indicator light is green now). Press
“Computer” to turn on the computer (only applicable to the model with built in
PC.
Basic Operating
Power Off
•
If you want to turn off the touch LED display temporary, press “Power” on
the touch LED display. Press “Computer” on the panel to turn off the
computer when it is in the ON status (only applicable to the model with
built in PC)
•
If you want to turn off the touch LED display completely, turn off the ship
form switch on the bottom of the touch LED display (beside the power
interface) or unplug the power cord
•
For the model with built in PC, turn off the PC and disconnect the power