Sample application, Figure 69: device list in zero config – Grandstream UCM6510 User Manual User Manual
Page 107
Firmware Version 1.0.2.5
UCM6510 IP PBX User Manual
Page 106 of 313
Figure 69: Device List in Zero Config
In this web page, users can also click on “Reset All Extensions” to reset the extensions of all the devices.
SAMPLE APPLICATION
Assuming in a small business office where there are 8 GXP2140 phones used by customer support and 1
GXV3275 phone used by customer support supervisor. 3 of the 8 customer support members speak
Spanish and the rest speak English. We could deploy the following configurations to provisioning the office
phones for the customer support team.
1. Go to web GUI->PBX->Zero Config->Auto Provision Settings, select “Enable Zero Config”.
2. Go to web GUI->PBX->Zero Config->Global Policy, configure Date Format, Time Format and
Firmware Source as follows.