Grandstream UCM6510 User Manual - Manual (Page 26)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 25 of 313
INSTALLATION
Before deploying and configuring the UCM6510 series, the device needs to be properly powered up and
connected to network. This section describes detailed information on installation, connection and warranty
policy of the UCM6510 series.
EQUIPMENT PACKAGING
Table 2: UCM6510 Equipment Packaging
Main Case Yes ( x 1)
Power Adapter Yes ( x 2)
Ethernet Cable Yes ( x 1)
Wall Mount Yes ( x 2)
Screws Yes ( x 6)
Quick Installation Guide Yes ( x 1)
CONNECT YOUR UCM6510
CONNECT THE UCM6510
Figure 1: UCM6510 Front View
Figure 2: UCM6510 Back View
Follow the steps below to connect the UCM6510 for initial setup: