Remote extension in ring group, Figure 112: sync ldap server option, Remote extension in ring – Grandstream UCM6510 User Manual User Manual
Page 210: Group
Firmware Version 1.0.2.5
UCM6510 IP PBX User Manual
Page 209 of 313
REMOTE EXTENSION IN RING GROUP
Remote extensions from the peer trunk of a remote UCM6510 can be included in the ring group with local
extension. An example of Ring Group with peer extensions is presented in the following:
1. Creating SIP Peer Trunk between both UCM6510_A and UCM6510_B. SIP Trunk can be found under
web UI-> PBX-> Basic/Call Routes-> VoIP Trunks. Also, please configure their Inbound/Outbound
routes accordingly.
2. Click edit button in the menu
, and check if Sync LDAP Enable is selected, this option
will allow UCM6510_A update remote LDAP server automatically from peer UCM6510_B. In addition,
Sync LDAP Password must match for UCM6510_A and UCM6510_B in order to sync LDAP contact
automatically. Port number can be anything between 0~65535, and use the outbound rule created in
step 1 for the LDAP Outbound Rule option.
Figure 112: Sync LDAP Server option