Install canopy sensor – Greenheck Melink IH3 Installation User Manual
Page 13
L ≤ 15’ (4572mm)
Melink Corporation (513) 965-7300 www.melinkcorp.com
4
5
Hood 1 (Top View)
Install Canopy Sensor
B
Install one (1) Temperature Sensor per hood, if the length of the hood is less than 15’. In most
cases this will mean one Temperature Sensor per hood.
A
L < 15’ (4572mm)
Hood 2 (Top View)
5
Determine Number of Sensors
Select Location for Mounting Sensor
Select a location for mounting each
Temperature Sensor. For hoods
<15’, the sensor should be close to
the center of the canopy. Be care-
ful to avoid installing the sensor
next to incandescent light bulbs as
they can adversely affect accuracy
of the sensor. Proceed with steps
C-F on page 14.
13
In some cases, this will mean two Temperature Sensors per hood.
Sensor Location
Sensor Location