Greenheck ERVe and PVe (472119) - Manual

1
®
Part #472119
Roof Curb and Duct Adapter Assembly
Models ERVe and PVe
Model ERVe and PVe Curb and Duct Adapter Assembly
STEP 1: Unpack and Inspect Parts
Tools Recommended for Assembly
• Cordless drill
•
5 /
16
in. Nut setter
• Awl — for hole alignment
ERVe
Part Description Quantity
ERVe-20 ERVe-35 ERVe-45 ERVe-55
Part # Part # Part # Part #
Roof Curb Kit 1 852868 852869 852870 852871
1. End Channel 2 726994 727034 725254 727056
2. Side Channel 2 726995 727035 725255 727057
3. Center Channel 1 726996 727036 725256 727058
4. End Support 1 726997 727037 725257 727059
5. Insulation Pan 2 726998 727038 725258 727060
6. Duct Adaptor 1 726999 727039 725259 727061
Hardware Kit 1 852902 852902 852902 852902
Screws, SMS (A) 12 x 0.625 (IHH) 36 415180 415180 415180 415180
PVe
Part Description Quantity
PVe-20 PVe-35 PVe-45 PVe-55
Part # Part # Part # Part #
Roof Curb Kit 1 852904 852905 852906 852907
1. End Channel 2 729491 729499 729507 729515
2. Non-Access Side Channel 1 729492 729500 729508 729516
3. Access Side Channel 1 729493 729501 729509 729517
4. Middle Support 3 729494 729502 729510 729518
5. Supply Side Support 1 729495 729503 729511 729519
6. Insulation Pan 2 729496 729504 729512 729520
7. Duct Adaptor, Supply Discharge 1 729497 729505 729513 729521
8. Duct Adaptor, Exhaust Intake 1 729498 729506 729514 729522
Hardware Kit 1 852902 852902 852902 852902
Screws, SMS (A) 12 x 0.625 (IHH) 36 415180 415180 415180 415180
Assembly and Installation Instructions
Please read and save these instructions for future reference. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property damage!
Upon receiving the product, check for any damage that may have occured during transit and report it
immediately to the shipper. Also verify that all accessory items are accounted for.