Greenheck ERVe and PVe (472119) - Manual (Page 3)

3 Model ERVe and PVe Curb and Duct Adapter Assembly
®
PVe Hardware Required:
(32) Screws, SMS (A) 12 x 0.625 (IHH)
(2) End Channels
(1) Non-Access Side Channel
(1) Access Side Channel
(3) Middle Support
(1) Supply Side Support
STEP 2: Assemble Main Curb for Model PVe
Instructions: • See PVe Main Curb Assembly for positioning of the correct hardware.
• Align the holes and fasten as shown below.
PVe Main Curb Assembly
Overall Curb Dimensions for Model PVe
PVe-20 PVe-35 PVe-45 PVe-55
W 36.781 44.59 56.326 71.326
L 99.385 99.385 105.885 111.716
X 18.046 18.046 18.046 18.046
All dimensions shown are in inches.
End and side channels
fasten together, as shown.
End
Side and center channels
fasten together, as shown.
Supply Side Channels
End Channel
End Channel
Side Channels
End
Support
Center
Channel
L
W
L
Middle Support
End Channel
W
X
End Channel
Middle Support
Access
Side Channel
Access
Side Channel
Non-Access
Side Channel
End
Support