Highgear Aerial - Manual (Page 11)

10
english
Keys and TheIr funcTIons
Key aCtions – QuiCK press Vs. press and hold
There are two key actions used to program the watch:
QuiCK press
The key is pressed quickly and immediately released. This is the most common key action and is
used for most aspects of operation
press & hold
The key is pressed and held for 2-3 seconds. This key action is generally used to initiate a
programming sequence or to change an on-screen variable.
note 1: Generally, when a press & hold action is required, the word hold will appear on
the center line of the display.
note 2: In this manual we will indicate when a press & hold is required.
In most other instances a QuiCK press should be assumed.
prograMMing the WatCh – CoMMon Key aCtions
enter a prograMMing seQuenCe
press & hold the s5 key.
The words hold – adjust will appear in the center and bottom lines of the display. Continue
to hold the key until the display automatically advances to the first variable in the programming
sequence.
adjust VariaBle in a prograMMing seQuenCe
QuiCK press the s1 or s2 keys.
Variables in a programming sequence are adjusted up using a QuiCK press of the s1 key and
down using a QuiCK press of the s2 key.
In most programming options, a press & hold of either the s1 or s2 key will cause the variable
to fast advance, allowing you to quickly advance to a different number.
Continued next page.