Highgear Aerial - Manual (Page 12)

11
english
Keys and TheIr funcTIons
adVanCe to neXt VariaBle in a prograMMing seQuenCe
QuiCK press the s4 key.
When you have chosen the variable you want for a particular portion of a programming sequence
QuiCK press the s4 key to set and advance to the next variable.
note: As long as you press the s4 key, you will continue to cycle through the variables for
that sequence.
eXit a prograMMing seQuenCe
QuiCK press the s5 key.
Once all variables of a programming sequence have been entered to your satisfaction, QuiCK
press the s5 key to exit the programming sequence and return to the initial main display.
aCtiVate the display BaCKlight systeM-
QuiCK press the s3 key.
Activate the backlight system at any time with a QuiCK press of the s3 key. The backlight will
remain active for a period of 5-seconds after the press of the s3 key. If, while the backlight is
active, another key is pressed, the timer will be reset and the 5-second period will start again. This
will happen for as long as keys are pressed. This allows you to easily operate and program the
watch in low light situations.
note: Excessive use of the backlight system will result in shorter battery life.