Time functions – Highgear Aerial User Manual

Page 15

Advertising
background image

14

english

TIme funcTIons

VieW tiMe zone 1 / tiMe zone 2

The ATF8 / Alterra / Altiforce / Aerial unit is equipped with a full feature

watch package including Time of Day, Day/Date/Day of Week, Two Time

Zones and Two Daily Alarms.
The Time Zone being displayed is indicated by a small t1/t2 in the

lower left corner of the display.

VieW / Change tiMe zone: press & hold the s2 key

setting the tiMe oF day

1. Start in tiMe Mode.
2. Select tiMe 1 or tiMe 2 using the s2 key.
3. press & hold the s5 to enter the setting sequence.
4. Adjust hour, Minutes, seConds, year, Month, date,

12/24 hour mode using the s1 and s2 keys. The variable being

programmed (Hours, Min, Sec, etc.) will be shown in the Bottom

Line of the display.

Note: The minutes can only be adjusted in tiMe 1.

5. Set each variable using the a QuiCK press of the s4 key.
6. Exit setting sequence using the s5 key.
7. Select alternate time and repeat the above procedure.

Advertising
This manual is related to the following products: