Hypertherm SuperMicro 370SBA 533Mhz - Manual (Page 56)

SUPER 370SBA/370SBM/370SLA/370SLM User’s Manual
5-4
Pri Master ARMD Emulated as
Pri Slave ARMD Emulated as
Sec Master ARMD Emulated as
Sec Slave ARMD Emulated as
Options for Pri Master ARMD Emulated as, Pri Slave ARMD Emulated as,
Sec Master ARMD Emulated as and Sec Slave ARMD Emulated as are
Auto, Floppy or Hard disk .
1st Boot Device
2nd Boot Device
3rd Boot Device
The options for 1st Boot Device are Disabled, 1st IDE-HDD, 2nd IDE-HDD,
3rd IDE-HDD, 4th IDE-HDD, Floppy, ARMD-FDD, ARMD-HDD, ATAPI CD
ROM, SCSI, Network or I
2
0 . The options for 2nd Boot Device are Disabled,
1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD, 4th IDE-HDD, Floppy, ARMD-
FDD, ARMD-HDD or ATAPI CD ROM . The options for 3rd Boot Device are
Disabled, 1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD, 4th IDE-HDD, Floppy,
ARMD-FDD, ARMD-HDD or ATAPI CD ROM .
1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD and 4th IDE-HDD are the four
hard disks that can be installed by the BIOS. 1st IDE-HDD is the first hard
disk installed by the BIOS, 2nd IDE-HDD is the second hard disk, and so
on. For example, if the system has a hard disk connected to Primary Slave
and another hard disk to Secondary Master, then 1st IDE-HDD will be
referred to as the hard disk connected to Primary Slave and 2nd IDE-HDD
will be referred to as the hard disk connected to the Secondary Master.
3rd IDE-HDD and 4th IDE-HDD are not present. Note that the order of the
initialization of the devices connected to the primary and secondary
channels are Primary Master first, Primary Slave second, Secondary Master
third, and Secondary Slave fourth.
The BIOS will attempt to read the boot record from 1st, 2nd, 3rd and 4th
boot device in the selected order until it is successful in reading the booting
record. The BIOS will not attempt to boot from any device which is not
selected as the boot device.
Try Other Boot Device
This option controls the action of the BIOS if all the selected boot devices
failed to boot. The settings for this option are Yes or No . If Yes is
selected and all the selected boot devices failed to boot, the BIOS will try
to boot from the other boot devices (in a predefined sequence) which are
present but not selected as boot devices in the setup (and hence not yet