Hypertherm SuperMicro 370SBA 533Mhz - Manual (Page 69)

Chapter 5: Running Setup
5-17
Reserved Memory Size
This option specifies the size of the memory area reserved for legacy ISA
adapter cards. The settings are Disabled , 16K , 32K or 64K .
Reserved Memory Address
This option specifies the beginning address (in hex) of the reserved
memory area. The specified ROM memory area is reserved for use by
legacy ISA adapter cards. The settings are C8000 , CC000 , D0000 , D4000 ,
D8000 or DC000 .
PCI Device Search Order
The settings are First-Last or Last-First . This option selects the search
priority during system startup of the PCI card slots; starting from PCI 1 thru
PCI 4 (First-Last) or PCI 4 thru PCI 1 (Last-First).
Default Primary Video
This feature supports multiple displays, and selects the default video device
based on card type. The settings are AGP or PCI .
Peripheral Setup
Remote Power On
Microsoft’s Memphis OS supports this feature which can wake-up the
system from SoftOff state through devices (such as an external modem)
that are connected to COM1 or COM2. The settings are Disabled or
Enabled .
CPU Current Temperature
The current CPU temperature is displayed in this option. Note: This
option shows both CPU1 and CPU2 , but CPU2 is grayed out with only
one Celeron processor.
CPU Overheat Warning
The settings for this option are Enabled or Disabled . When set to Enabled
this option allows the user to set an overheat warning temperature.
CPU Overheat Warning Temperature
This option is grayed out for the Celeron processor, but is available for the
Pentium II processor.