Hypertherm HD3070 w/Manual Gas User Manual
Page 21
2-10
HD3070 with Manual Gas Console
Product Configuration Manual
4
ORDERING PROCEDURE
Specify the Work Cable Between the Power Supply and the Work Table
The work (positive) cable connects the positive side of the power supply circuit to the workpiece via the
cutting (work) table. It should be kept as short as possible.
• Determine the necessary length for the work cable and order from the parts list on page 2-11.
Specify the Leads Between the Power Supply and the Gas Console
The leads set contains two control cables that interface the manual gas console with the power supply.
• Determine where the gas console will be mounted and the distance between the power supply and the
gas console. Order the appropriate length leads.
Note that the hoses from the gas supplies to the gas console are not provided by Hypertherm.
6
5