Hypertherm HT4100 Plasma Arc Cutting System Operating - Manual (Page 2)

HT4100
Plasma Arc Cutting System
- Operation -
Instruction Manual
IM-166
(P/N 801660)
for Serial Numbers
beginning with
4100-000001
Revision 4 June, 1996
HYPERTHERM, Inc.
P.O. Box 5010
Hanover, New Hampshire 03755-5010
Tel.: (603) 643-3441
Fax: (603) 643-5352
© Copyright 1996 Hypertherm, Inc.
All Rights Reserved
HYPERTHERM HT and MAX are trademarks of Hypertherm, Inc. and may be
registered in the United States and/or other countries