Hypertherm HT4100 Plasma Arc Cutting System Operating - Manual (Page 45)

4-2
STANDARDS INDEX
HT4100 Instruction Manual: Operation
For further information concerning safety practices to be exercised with plasma arc cutting equip-
ment, please refer to the following publications:
1. ANSI Standard Z49.1, Safety in Welding and Cutting , obtainable from the American Welding
Society, 550 LeJeune Road, P.O. Box 351020, Miami, FL 33135.
2. NIOSH, Safety and Health in Arc Welding and Gas Welding and Cutting , obtainable from the
Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.
3. OSHA, Safety and Health Standards , 29FR 1910, obtainable from the U.S. Government
Printing Office, Washington, D.C. 20402.
4. ANSI Standard Z87.1, Safe Practices for Occupation and Educational Eye and Face Protection ,
obtainable from the American National Standards Institute, 1430 Broadway, New York, NY
10018.
5. ANSI Standard Z41.1, S tandard for Men's Safety-Toe Footwear , obtainable from the American
National Standards Institute, 1430 Broadway, New York, NY 10018.
6. ANSI Standard Z49.2, Fire Prevention in the Use of Cutting and Welding Processes , obtainable
from the American National Standards Institute, 1430 Broadway, New York, NY 10018.
7. AWS Standard A6.0, Welding and Cutting Containers Which Have Held Combustibles , obtain-
able from the American Welding Society, 550 LeJeune Road, P.O. Box 351040, Miami, FL
33135.
8. NFPA Standard 51, Oxygen — Fuel Gas Systems for Welding and Cutting , obtainable from the
National Fire Protection Association, 470 Atlantic Avenue, Boston, MA 02210.
9. NFPA Standard 70-1978, National Electrical Code , obtainable from the National Fire Protection
Association, 470 Atlantic Avenue, Boston, MA 02210.
10. NFPA Standard 51B, Cutting and Welding Processes , obtainable from the National Fire Protec-
tion Association, 470 Atlantic Avenue, Boston, MA 02210.
11. CGA Pamphlet P-1, Safe Handling of Compressed Gases in Cylinders , obtainable from the
Compressed Gas Association, 1235 Jefferson Davis Highway, Arlington, VA 22202.
12. CSA Standard W117.2, Code for Safety in Welding and Cutting , obtainable from the Canadian
Standards Association Standard Sales, 178 Rexdale Boulevard, Rexdale, Ontario M9W 1R3,
Canada.
13. NWSA booklet, Welding Safety Bibliography , obtainable from the National Welding Supply
Association, 1900 Arch Street, Philadelphia, PA 19103.
14. American Welding Society Standard AWS F4.1, Recommended Safe Practices for the Prepa-
ration for Welding and Cutting of Containers and Piping That Have Held Hazardous Sub-
stances
, obtainable from the American Welding Society, 550 LeJeune Road, P.O. Box 351040,
Miami, FL 33135.