Lifting power supply -2, Powermax, Lifting power supply – Hypertherm Powermax600 Operator Manual User Manual
Page 25: Power hookup
Advertising
SETUP
3-2
powermax
600
Operator Manual
Lifting Power Supply
WARNING
The power supply weighs up to 54 lb / 25 kg. Do not lift the power supply by ONE handle. The
handle can break, resulting in injury and damage to the power supply.
Power Hookup
Check Required Input Voltage
Look at U1 on the data plate to check input voltage requirements.
The data plate is on the back of the power supply.
54 lb
25 kg
Hoist
Cover in place
Approved
hoisting strap.
Keep as vertical
as possible
Advertising