Hypertherm Powermax600 Operator Manual - Manual (Page 45)

MAINTENANCE AND PARTS
10-99
5-2
powermax 600 Operator Manual
Routine Maintenance
WARNING
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance.
All work requiring removal of the power supply cover must be
performed by a qualified technician.
Each Use
Check gas pressure.
Replace damaged power
cord or plug. Replace damaged
torch lead. Check pressure hose and
connections for leaks.
Clean the inside of the
power supply with air
pressure or vacuum.
Replace damaged labels.
Check torch cap-on safety switch: listen for
"click" when the retaining cap is loosened.
Check consumables for proper
installation and wear.
Check trigger for damage. Check torch body
for cracks and exposed conductors.
Each Week
6 Months
3 Months