Datalogic Scanning PDA - Manual (Page 38)

FMU Operation
26 Falcon ® Management Utility (FMU)
Adding a Server
If you installed the complete system, you do not need to specify the initial
server information. During a complete install, a local server is automatically
created for you. Additional servers can be added after installation.
To add a server:
On the File menu, click Add > Server to open the Add Server dialog:
Figure 12. Add Server
To add a server you must select the FMU Start Page at the root level of the FMU Tree
View.
Name Enter the desired server Name.
Domain Name or
IP Address Enter the server ’ s Domain Name or IP address.
Server Path Enter the network location of the server, i.e.,
\\myserver\company\FMU\server.
*Copy files and
images to server When checked, the FMU remote server will keep a local copy of the
files associated with packages. This eliminates the need for the FMU
Workstation to be running during terminal updates.
*The server needs access/security permissions to the specified directory.
See the section entitled “Troubleshooting” for more information.