Datalogic Scanning PDA - Manual (Page 62)

Terminal to FMU Server Communications
50 Falcon ® Management Utility (FMU)
Direct Connect
For terminals using a physical connection, communication needs to be estab-
lished with the computer where the FMU Server will be installed. Please refer
to the PRG for your terminal type, included on the Datalogic Mobile Product
CD, for specific installation and configuration instructions.
Requirements for a physical connection may vary depending on the terminal
model. Refer to your terminal’s PRG.
Enabling a Terminal for FMU with Direct Connect
Use Direct Connect with terminals that use a dock.
Enable a terminal for FMU using Direct Connect
1. On the terminal you want to set up:
WinCE:
Go to Start > Programs > Falcon Management > FMUinit.
Windows Mobile:
Tap > Settings > System > Falcon Config.
2. Check Enable FMU Client .
3. Select Direct from the drop-down list for the Connection field.
4. Enter the group to which you want to add the terminal. If you leave
the field blank, the terminal will automatically be assigned to the
Default Group.
5. Tap OK to complete the setup.