Ivoclar Vivadent Stratos 200 - Manual (Page 9)

30
4. Installation and Initial Start-up
4.1 Unpacking and checking the con-
tents
Remove the components of the Stratos 200 from their packaging
and check the delivery for completeness.
Stratos 200 basic model
1x
Stratos 200
2x Protrusion inserts 30°
2x Protrusion inserts 30° for the fixed axis
2x Bennett inserts 30°
1x Incisal plate 0°
1x Incisal indicator
2x Retentive base blocks
1x Plaster protection plate
1x Incline support holder
If certain parts are missing or damaged, contact your local Ivoclar
Vivadent Customer Service. We recommend keeping the original
packaging for possible future transportation purposes.
4.2 Assembly and initial set-up
Insert the incline support holder (7.2) into the holding device (7.1)
for the incline support holder. If necessary, the incline support
holder can be removed from the
apparatus.
Secure the base block (33) to the articulator by means of the G-I
knurled screw (2.1).
Incline support
The incline support holder enables ergonomic handling of the
articulator. If mounted, it maintains the articulator at approx. a
45° angle. This position permits a superb overview of the model
mounted in the articulator.
4.3 Joint inserts (Protusion and
Bennett inserts)
The joint inserts delivered with the basic model can be exchanged
as necessary (see list of accessories).
Procedure
The Bennett inserts can be removed and exchanged by loosening
the B-knurled screw (3.2).
The B-knurled screw can be completely removed from the Bennett
element.
The corresponding positioning of the P-knurled screw (5.2) per-
mits the exchange of the protrusion inserts (5.1).
3.2
3.1
5.1
5.2