Ivoclar Vivadent IPS e.max Press Abutment Solutions v.2 - Manual (Page 35)

35
Tip: Isolate the inner aspect of the crown with glycerine gel.
Apply Virtual Extra Light Body Fast Set to the inner aspect of the crown.
Remove excess Virtual material.
Carefully remove the crown from the hybrid abutment and remove the
Virtual Extra Light Body Fast Set material.
Unscrew the hybrid abutment.
Place the crown intraorally onto the hybrid abutment to check and adjust the proximal
contacts, if necessary. Note: No occlusal functional checks must be performed
at this stage.
Use your finger to press the crown to the hybrid abutment until the final position has
been achieved. Hold the crown in the final position until the Virtual material has set.
Check the occlusion/articulation and use suitable grinding instruments to make
possibly required adjustments.
Application
procedure
–
Optional:
Clinical
try-in