Ivoclar Vivadent IPS e.max Press Abutment Solutions v.2 - Manual (Page 45)

45
Application
procedure
–
Seating
and
After
car
e
Apply the luting material, e.g. SpeedCEM, into the conditioned crown.
Conduct the pre-polymerization using the four-quarter technique.
Cover the restoration margin with glycerine gel (e.g. Liquid Strip).
Rinse off the glycerine gel with water. Check the occlusion and articulation and make adjustments, if necessary.
Place the crown onto the hybrid abutment and secure in place.
Remove excess luting material.
Polymerize with an LED curing light (e.g. bluephase).