Ivoclar Vivadent IPS e.max Press Abutment Solutions v.2 - Manual (Page 48)

48
Insert the hybrid abutment crown intraorally into the implant.
Tighten the implant screw with a torque wrench (observe the instructions of the
manufacturer).
Polymerize with an LED curing light (e.g. bluephase).
Polish to a high gloss using silicone polishers (e.g. Astropol P, Astropol HP or
Astrobrush).
Completed IPS e.max Press hybrid abutment crown
Manually screw in the matching implant screw.
Seal the screw channel with a composite material (e.g. Tetric EvoCeram) in
the appropriate shade.
After polymerization, check the occlusion/articulation and correct possible rough spots
with suitable finishers (e.g. Astropol F) or fine diamonds.