Kreg KMS8000 Precision Trak & Stop Kit - Manual (Page 2)

INSTRUCTIONAL MANUAL
Precision
Trak & Stop Kit
R
5-2010 FT4213
Rev C
APPLICATIONS FOR THE PRECISION TRAK & STOP KIT
R
R
MITER SAW RADIAL ARM SAW
DRILL PRESS
The Kreg Precision Trak & Stop Kit contains all the necessary hardware to add a new
level accuracy to your woodworking equipment. Whether you are building a new set of
support tables for your
Miter Saw or replacing the fence on your Radial Arm Saw the
unique design of the Top Trak included in this kit attaches to the fence portion of your
set-up to provide a calibrated system that will eliminate the need to measure and mark
material prior to cutting. These same parts combine with a shop-made
Drill Press table
to provide a repeatable system that will greatly reduce the time required to layout furniture
parts or cabinet components.
The Production Stop provides a “rock-solid” index point to make one cut, or a thousand
cuts, exactly the length desired. The unique design of this stop allows the user to simply
lift it from one side of the saw blade or boring bit and move it to the other without the fuss
of moving it to the end of a fence.
The Swing Stop™ features a “self-elevating” arm that rises over a board to allow for
quick trimming of the end without repositioning the stop. This same feature proves
invaluable on the Drill Press for multiple stop set-ups.
Each stop has an integral Red-line Cursor that combines with the Self Adhesive
Measuring Tapes to provide precise cuts until now only seen on high quality table saws.
Use the pictures on this page to provide a guide to create the perfect Precision Measuring
System for your woodworking equipment.
KMS8000
Perfect Miter Attachment - KMS7831
This attachment to the Kreg stops references a 45 degree mitered
board on two surfaces, greatly increasing the cutting accuracy and
repeatability of the mitered cut. Great for picture framing.
Mini Trak - KMS7506
Mini T rak can be used to produce countless types of woodshop jigs
and fi xtures such as taper jigs, cutoff sleds, and more. Bottom of trak
accepts a 1/2” wide measuring tape to increase accuracy. T-slot will
capture the head of any 1/4” hex bolt. Sold in a 4’ length with tape.
Easily cut to length with a hacksaw.
Trak Klamp - KMS751 1
This inexpensive and versatile clamp works great in a variety of
applications. Fits the Mini T rak, T op T rak or HD T rak. For most
clamping applications, we suggest using two clamps to keep the
work piece from rotating.
Precision Band Saw Fence - KMS7200
Introduce a new level of accuracy to your band saw with our
Precision Band Saw Fence. We’ve designed this fence with noted
band saw expert Mark Duginske to produce an unprecedented level
of rigidity, adjustability , and precision. The fence is adjustable in
two dimensions for ease in setting it parallel to the blade. Cutting
accuracy and repeatability is further enhanced by the precision lens
curser that reads off of the included scale.
Precision Miter Gauge System - KMS7102
Cut perfect miters consistently with the Precision Miter Gauge
System. Features factory calibrated accuracy from a gauge head
that is machined on a computerized milling machine. A 24” Heavy
Duty T rak section with patented Swing Stop™ and self-adhesive
measuring tape is included.
KREG TOOL COMPANY
Huxley, Iowa
Customer Service 800.447.8638
Visit www .kregtool.com today for additional tools,
accessories, plans and instructional videos.
Other Products Available from Kreg.
WARNING: This product contains one
or more chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.