Kreg PRS1200 Precision Beaded Face-Frame System - Manual (Page 4)

4
Setup
Step 5: Assemble Clamp and Router Stop
Assemble the integrated clamp with the long t-bolt, spacer, ¼” washer
and ¼” nut, as shown at left. Once assembled, lock the clamp into
position on the left side of the fence about 1” from the edge.
Please reference the one-page instruction manual for the Precision
Router Table Stop included with this kit to correctly assemble your
Router Stop.
Step 4: Align Fence
Using a straight piece of scrap wood, align the left edge of the Fence
to the Sliding Base. With the two aligned, you can now secure them
together using the included ¼” Button Head screws and ball-end Allen
wrench. Once secured, remove the Fence Spacers holding the Fence
in place above the table.