Leprecon AI-512 - Manual (Page 20)

The second setting has to do with how fader playbacks and button playbacks interact with each other. The
default setting is for button and fader panels to control the same presets. Bringing up fader 1 has the same
effect as pressing button 1. This is indicated as 'Shared Playbacks'.
Changing the fader / button Panel setting to 'Independent Playbacks' essentially moves the faders to a new set
of playbacks. When 'Independent Playbacks' is selected, all fader panels will control playbacks starting with
13. A six fader panel will control playbacks 13 through 18, and a twelve fader panel will control playbacks 13
through 24. These settings apply to each individual room. Panels can be 'shared' in one room, and
'independent' in another.
Note: There are a total of 28 playbacks in the AI-512 system. Twenty four of them can be assigned to
hardware playbacks; either buttons or faders. The last four are 'virtual' playbacks, and can be controlled only
by contact closures or other trigger events.
20