LSC Lighting MINIM - Manual (Page 22)

Chases MINIM Operator Manual V1.0
Page 18 of 27
LSC Lighting Systems (Aust) Pty. Ltd.
TO ACTIVATE EXTERNAL TRIGGER TO RUN A CHASE
To link the External Trigger Input to activate the Chase, hold down
[function]
tap
[extern]
, then
release
[function].
TO ACTIVATE AUDIO INPUT TO RUN A CHASE
To link the Audio Input to activate the Chase, hold down
[function]
tap
[bass]
, then release
[function].
TO ADD A STEP IN A CHASE
Edit the Chase (above) then press and hold the [start/stop/step] button and tap the [F/A]
button (step number) to advance the Chase to the step where the new step is to be added. The
new step will be inserted prior to the selected step. In order to add a step onto the end of a chaser
select the 1
st step and the new step will be inserted onto the end of the chaser.
Whilst holding down the [function] button, press [add], then release [function]
The RECORD SCENE LED will flash to indicate that you can record a snapshot of the output..
To add a previously recorded Scene as a step, press [PAGE] (optional to select the page
containing the Scene) then press [F/A] (Scene number).
To add a snapshot as a step, create the look on the output and then press
[record scene]
.
HINT: when recording a snapshot of the output as a step, remember to keep the Chase faded down
so that it is not included in the new step.
The new step has now been added.
TO DELETE A STEP IN A CHASE
Edit the Chase (above) then press and hold the [start/stop/step] button and tap the [F/A]
button (step number) to advance the Chase to the step that is to be deleted.
Whilst holding down the [function] button, press [delete] , then release [function].
The step number selected above will now be deleted. If you delete all the steps of a chase then the
MINIM keeps a blank (blackout) step as the first step, to enable the editing and inserting of new
steps.
TO CHANGE THE SPEED OF A CHASE
The recorded speed will be displayed by the flash rate of the SPEED LED indicator. If the speed
has been recorded at zero level, then the LED will be permanently lit. To adjust the recorded
speed, rotate the [speed] rotary fader clockwise/counterclockwise until the LED illuminates. This
indicates that you have matched the recorded value and the rotary fader is now controlling the
speed.
TO CHANGE THE CROSSFADE TIME OF A CHASE
To view the recorded Crossfade level of a Chase, rotate the [crossfade] rotary fader
clockwise/counterclockwise until the LED is lit. This will indicate the recorded level. The level is now
under the control of the rotary fader and any adjustments will now be saved in the Chase memory.
To exit EDIT mode, press and hold
[MEMORY]
until the RUN LED is lit.
6.6 DELETE A CHASE
To delete a Chase,
press [record chase] [F/A] (Chase number to be deleted) [record chase]