Lumens Technology DC145 - Manual (Page 15)

English - 14
Chapter 5 Start Using
 Once the Power is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED does
not light up.
1. Place an object to be displayed
under the camera.
2. Turn on Power .
3. Adjust the gooseneck and lens to
the appropriate positions.
4. Press [AUTO TUNE] button
to optimize the image. You are
ready to teach/present.
 Each time the camera head is
moved, please locate it and then
press [FOCUS] to refocus the lens.