Lumens Technology DC145 - Manual (Page 22)

English - 21
Chapter 7 Descriptions of Major Functions
7.1 I would like to automatically adjust the image to have
the best brightness and focusing performance
1. Press [AUTO TUNE] for the best brightness and focusing performance.
7.2 I would like to switch image sources
Live image is the default image source. Press [SOURCE] to have
DC145 switch among the following images sources:
1. Live images (default).
2. Computer.
7.3 I would like to switch the image mode
1 Press [MENU] to activate the setting menu.
2 Press
[], [], [], or [] to select [Image Mode].
3 Press [] or [] to the [Normal/Film/Slide/Microscope].
4 Press [MENU] to exit.
7.4 I would like to make text clearer and photos more
colorful
7.4.1 Photo/Text mode descriptions
The default [Photo/Text] mode is in Photo (Photo mode). To change this
setting, please activate the options of the setting menu.
 [Photo] (default): for viewing photos or text with photos, making photos
more colorful.
 [Text]: for viewing text files, making the text clearer.
 [Gray]: for viewing black & white photos which will make the grayscale
differentiation distinct.
7.4.2 Set up Photo/Text mode
1. Press [MENU] to activate the setting menu.
2. Press [], [], [], or [] to select [Photo/Text]. (Please refer to
7.4.1
Photo/Text mode descriptions to make the best choice.)
3. Press [ENTER] to activate.
4. Press [] or [] to select the [Photo/Text/Gray].
5. Press [MENU] to exit.