Lumens Technology DC145 - Manual (Page 25)

English - 24
2. Press [CAPTURE] again to stop recording.
7.12.2 Setting the quality of captured images
1. Press [MENU] to activate the setting menu.
2. Press
[], [], [], or [] to select [Setting].
3. Press [ENTER] to activate.
4. Press
[] or [] to the [Capture Settings] menu.
5. Press [] to find [Image Quality].
6. Press [] or [] to select among [High/Medium/Low].
7. Press [MENU] to exit.
7.12.3 Recording setup
1. Press [MENU] to activate the setting menu.
2. Press
[], [], [], or [] to select [Setting].
3. Press [ENTER] to activate.
4. Press
[] or [] to the [Capture Settings] menu.
5. Press [] to the [Capture Mode].
6. Press [] or [] to select [Record].
7. Press [MENU] to exit.
<Remark> When the [Capture Image] mode is set to [Record], the
function of [Capture] is changed to image recording.
7.12.4 Playing images
 For playing videos, please refer to 7.13 I would like to view
captured/recorded images .
7.13 I would like to view captured/recorded images
1. Press [PLAYBACK] to show the thumbnails of all stored files.
2. Press [], [], [], or [] to select the thumbnail you want to play.
3. Press [ENTER] for full-screen play.
4. When the video is played, it can be paused/played by pressing [Freeze].
5. Press [] or [] to select the next or previous audio/video file.
6. Press [] or [] to adjust the volume of the video.
7. Press [PLAYBACK] to return to the Thumbnail Mode to select other
Audio/Video Files, or press [MENU] to exit.
<Note> An external speaker must be connected to AUDIO OUT to play
sound.