Mounting the dc210 at desktop, Connecting with components, 2 mounting the dc210 at desktop – Lumens Technology DC210 User Manual
Page 12: 3 connecting with components
4.2 Mounting the DC210 at Desktop
1.
Please set up the DIP Switch settings first. Refer to
Chapter 5 DIP
Switch Settings
in the DC210 user manual.
2.
Please refer to the
Base Installation Guide
for installation instructions
for all parts.
4.3 Connecting with components
4.3.1 Step 1: Plugging in the Power Outlet
<Note>: Appearance of power cord may vary with countries /
regions
AC Outlet
4.3.2 Step 2: Connecting with components
¾
Connecting to a projector
z
Use VGA cable to connect VGA OUT connector on DC210 to a projector
or the VGA IN connector on a monitor.
English
-
11
¾
Connecting to a monitor
z
Use VGA cable to connect VGA PASSTHROUGH connector on DC210
to the VGA IN connector on a monitor.
[Note] The TO VGA PASSTHROUGH connector only outputs VGA IN
signals.