Lumens Technology DC210 - Manual (Page 29)

English - 28
7.5 I would like to adjust the brightness
If you use the remote control or the control panel:
1. Press [BRT +] to make it brighter
2. Press [BRT -] to make it darker
7.6 I would like to turn on / off the lamp
Control panel
1. The lamp is ON by default. Press [LAMP] to switch ON/OFF.
Remote control:
1. Press [MENU] to enter the setting menu.
2. Press [f] or [e] to select [Setting].
3. Press [d] to select [Lamp].
4. Press [f] or [e] to switch [ON] / [OFF].
7.7 I would like to automatically adjust the image to have
best brightness and focusing performance
1. Press [Auto Tune] on the control panel.
7.8 I would like to capture images
1. Press [Capture] on the remote control or control panel.
7.9 I would like to freeze images
1. Press [FREEZE] on the remote control or control panel.
7.10 I would like to view captured images
1. Press [PLAYBACK] on the remote control or control panel to display
thumbnails of all captured images.
2. Press [c] or [d] or [e] or [f] to select the thumbnail you want you
view.
3. Press [ENTER] for the full-screen display of the image.