Lumens Technology DC210 - Manual (Page 13)

¾ Connecting to a TV
1. Using C-Video cable to connect C-Video OUT connector on DC210 to
TV.
2. Adjust DIP Switch Setting.
„ NTSC: America, Taiwan, Panama, Philippine, Canada, Chile, Japan,
Korea and Mexico
„ PAL: Country/region not listed above:
<Note>: In C-Video Mode, some buttons on the machine panel and
remote control are not working.
<Note>: It doesn’t support C-Video and VGA simultaneously. Once
C-Video is on, VGA OUT is not supported.
3. After DC210 is re-started, new DIP switch configuration is effective.
English - 12