Marantz M-CR611 User Manual
Page 12
.
GFront panelH
Q6
Q4
Q3
Q5
Q2
Q7
Q1
Q1
Q0
J
USB port (T, Front)
Used to connect iPod or USB memory devices. (v p. 26)
K Front panel illumination
Lights when the power is on. The illumination color can be changed/
turned off using “Illumination” in the menu. (v p. 103)
L Standby indicator
The standby indicator changes as shown below according to the status
of the unit.
0
Power on : Off
0
Normal standby : Off
0
iPod charge standby : Red (v p. 56)
0
Display off : Green (v p. 91)
0
Alarm standby : Orange (v p. 100)
0
When “Network Control” is set to “On” : Red (v p. 108)
M
Power operation button (X)
Turns power to this unit on and off (standby). (v p. 35)
0 When “Clock Mode” is turned on, this button switches between normal mode
N Remote control sensor
This receives signals from the remote control unit. (v p. 8)
O Headphones jack (PHONES)
Used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the speaker terminals, SW OUT connector and AUDIO
OUT connectors.
NOTE
0 To prevent hearing loss, do not raise the volume level excessively when using
headphones.
P
VOLUME up/down buttons (VOLUME df)
Adjusts the volume. (v p. 36)
Q
Stop button (2)
12