When pairing (registering) with it. (v p. 64) – Marantz M-CR611 User Manual
Page 64
Connecting a Bluetooth device with the
NFC function via NFC
You can just touch this unit with a Bluetooth device to turn on power to this
unit and perform pairing or establish a connection between this unit and
the Bluetooth device.
1
Turn on the NFC function on the Bluetooth device.
0
For details, see the owner’s manual for your Bluetooth device.
2
Touch Q on this unit with the NFC antenna part on the
Bluetooth device.
If a pairing confirmation screen is displayed, follow the instructions
on this unit and the Bluetooth device to complete pairing.
0
Complete operations as instructed by the Bluetooth device.
.
3
Play back music on the Bluetooth device.
This unit outputs music from the Bluetooth device.
0 When “Network Control” is set to “On”, startup and connection can be performed
even when the unit power is off.
0
When you touch the N mark (Q) on this unit with the Bluetooth device that is
playing back music, this unit outputs that music.
0
Touch the N mark (Q) again during the Bluetooth connection to disconnect the
connection.
0
Touch the N mark (Q) again if pairing or connection with the Bluetooth device
fails.
NOTE
0 Before establishing a NFC connection, cancel the lock function on the Bluetooth
device.
0 When you touch this unit with a Bluetooth device, do so softly.
64