Marantz M-CR611 - Manual (Page 121)

o No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 19
0
Insert connection cables all the way in. －
0
Check that input connectors and output connectors are not reversely connected. －
0
Check cables for damage. －
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals. Also, securely tighten speaker terminals. Check speaker terminals for
looseness.
19
0
Check that a proper input source is selected. 35
0
Adjust the volume. 36
0
Cancel the mute mode. 36
0
Check that the correct input source is selected when audio is being input to this unit from an external
device.
65
0
Check the digital audio output setting on the connected device. The initial settings may be off depending
on the device.
65
0
Only 2-channel linear PCM can be input as the digital audio signal to the DIGITAL IN connector of this
unit.
65
0
Only Speaker A or Speaker B may be selected. Check that the speakers are connected correctly, and
press the SPEAKER A/B button to confirm.
92
0
No sound is output from the speakers when headphones are connected. 12
Contents Connections Playback Settings Tips Appendix
121 Front/Top
panel
Rear panel
Remote control
unit
Index