Marantz SR5008 - Manual (Page 112)

112
Appendix Tips Settings Connections Contents
Front panel Display Rear panel Index Remote
Playback
DTS sound mode
Sound mode type Description
DTS NEO:6 This mode can be selected when a DTS NEO:6 decoder is used to play back 2-channel source in 6.1/7.1-channel
surround sound including the surround back channel.
There is a “Cinema” mode optimized for movie playback, and a “Music” mode optimized for music playback.
DTS SURROUND This mode can be selected when playing sources recorded in DTS.
DTS ES DSCRT6.1 z1 This mode is suitable for playing discs recorded in DTS-ES. The surround back channel added using the discrete method
is played as an independent channel.
Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.
DTS ES MTRX6.1 z2 This mode is suitable for playing discs recorded in DTS-ES.
The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software
recording time is decoded by this unit’s matrix decoder and played from each channel (surround left, surround right,
surround back).
DTS 96/24 This mode can be selected when playing sources recorded in DTS 96/24.
DTS-HD This mode can be selected when playing sources recorded in DTS-HD.
DTS Express This mode can be selected when playing sources recorded in DTS Express.
z1 This mode can be selected when only one surround back speaker is used and no front height speaker is used.
z2 This can be selected when “Speaker Config.” – “Surr. Back” (vpage 169) is not set to “None”.
PCM multi-channel sound mode
Sound mode type Description
MULTI CH IN This mode can be selected when playing multi-channel PCM sources.