Marantz SR5008 - Manual (Page 194)

194
Appendix Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Tips
Symptom Cause / Solution Page
No video is shown on the TV with the
DVI-D connection.
• With the DVI-D connection, on some device combinations, devices may not function properly
due to the copy guard copyright protection (HDCP).
203
No video from an input source such
as a game console is shown on the
TV.
• When special video signals are input from a game console, etc., the video conversion function
may not function. Connect the input connector to the monitor output connector of the same
type.
–
While the menu is being displayed, no
video is shown on the TV.
• When the menu is operated during playback of some 3D video contents or of video at some
computer resolutions (such as VGA), no playback video is shown in the background of the
menu.
–
2 The menu screen is not displayed on the TV
Symptom Cause / Solution Page
The menu screen or status
information screen is not displayed on
the TV.
• The menu screen is only displayed on this unit and a TV connected by HDMI cable. If this unit
is connected to a TV using a different video output connector, operate while watching the
display on this unit.
• No status information is displayed for some 3D videos or videos with a computer resolution
such as VGA.
• When a 2D video is converted to a 3D video on the TV, the menu screen or status information
is not properly displayed.
• In the pure direct playback mode, the menu screen or status information is not displayed.
Switch to a sound mode other than the pure direct mode.
• Set the “TV Format” setting in the menu to a selection that is appropriate for the TV.
–
180
–
108, 109
153