2 reference level offset, 2 dynamic volume – Marantz SR5008 User Manual

Page 146

Advertising
background image

146

Appendix

Tips

Playback

Connections

Contents

Front panel

Display

Rear panel

Index

Remote

Settings

2 Reference Level Offset

Audyssey Dynamic EQ® is referenced to the standard film mix level. It

makes adjustments to maintain the reference response and surround

envelopment when the volume is turned down from 0 dB. However,

film reference level is not always used in music or other non-film

content. Dynamic EQ Reference Level Offset provides three offsets

from the film level reference (5 dB, 10 dB, and 15 dB) that can be

selected when the mix level of the content is not within the standard.

Recommended setting levels are shown at below.
0dB (Film Ref) (Default) : This is the default setting and should be used

when listening to movies.

5dB : Select this setting for content that has a very wide dynamic

range, such as classical music.

10dB : Select this setting for jazz or other music that has a wider

dynamic range. This setting should also be selected for TV

content as that is usually mixed at 10 dB below film reference.

15dB : Select this setting for pop/rock music or other program material

that is mixed at very high listening levels and has a compressed

dynamic range.

%

Setting is enabled when “Dynamic EQ” (vpage 145) is “On”.

2 Dynamic Volume

Solves the problem of large variations in volume level between TV,

movies and other content (between quiet passages and loud passages,

etc.) by automatically adjusting to the user’s preferred volume setting.
Heavy : Most adjustment to softest and loudest sounds.
Medium : Medium adjustment to loudest and softest sound.
Light : Least adjustment to loudest and softest sounds.
Off (Default) : Do not use “Dynamic Volume”.

%

If “Dynamic Volume” is set to “Yes” in “Audyssey® Setup” (vpage 158),

the setting is automatically changed to “Medium”.

Advertising