Marantz SR5008 - Manual (Page 140)

140
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
Surround Parameter
You can adjust the surround audio sound field effects to match your
preferences.
The items (parameters) that can be adjusted depend on the signal
being input and the currently set sound mode. For details on the
adjustable parameters, see “Sound modes and surround parameters”
(vpage 210).
%
• Some setting items cannot be set while playback is stopped. Make the settings
during playback.
2 Home Theater EQ
Gently softens the upper treble range of movie soundtracks to reduce
possible harshness and improve clarity.
On : “Home Theater EQ” is used.
Off (Default) : “Home Theater EQ” is not used.
2 Loudness Management
This sets whether to output as specified in “Dynamic Compression”
or output directly without compressing the dynamic range of audio
recorded in the disc.
On (Default)
: Outputs using the settings made in “Dynamic
Compression” and “Dialogue normalization function”
(vpage 179) are enabled.
Off : “Dynamic Compression” settings and “Dialogue Normalization”
are disabled, and the signals on the disk are output as is.
%
• This can be set in the Dolby TrueHD mode.
2 Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Auto (Default) : Automatic dynamic range compression on/off control
according to source.
Low / Medium / High : These set the compression level.
Off : Dynamic range compression is always off.
%
• You can set “Auto” only for the Dolby TrueHD source.