2 sound is interrupted or noise occurs, 2 no video is shown on the tv – Marantz SR5008 User Manual

Page 193

Advertising
background image

193

Appendix

Settings

Playback

Connections

Contents

Front panel

Display

Rear panel

Index

Remote

Tips

2 Sound is interrupted or noise occurs

Symptom

Cause / Solution

Page

During playback from the Internet

radio or USB memory device, sound

is occasionally interrupted.

• When the transfer speed of the USB memory device is slow, sound may occasionally be

interrupted.

• The network communication speed is slow or the radio station is busy.

–

–

When making a call on iPhone, noise

occurs in audio output on this unit.

• When making a call, keep a distance of 20 cm or longer between iPhone and this unit.

–

Noise often occurs in FM/AM

broadcasting.

• Change the antenna orientation or position.

• Separate the AM loop antenna from the unit.

• Use an FM outdoor antenna.

• Separate the antenna from other connection cables.

43

43

43

43

2 No video is shown on the TV

Symptom

Cause / Solution

Page

No picture appears.

• Check the connections for all devices.

• Insert connection cables all the way in.

• Check that input connectors and output connectors are not reversely connected.

• Check cables for damage.

• Match the input settings to the input connector of the TV connected to this unit.

• Check that the proper input source is selected.

• Check the video input connector setting.

• Check that the resolution of the player corresponds to that of the TV.

• Check whether the TV is compatible with copyright protection (HDCP). If connected to a

device not compatible with HDCP, video will not be output correctly.

• The HDMI signal cannot be converted to an analog signal. Use analog connections.

33, 34, 35, 37,

38, 39, 40, 41,

43, 45, 47, 48,

49

–

–

–

154

52, 129

154

180

203

204

Advertising