Marantz SR4023 - Manual (Page 7)

4
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND FUNCTIONS
ENGLISH
t CLEAR button
Press this button to cancel the tuner preset station or
preset scan tuning. (See page 15)
y INFRARED receiving sensor
window
This window receives infrared signals from the
remote control.
u MUTE button
Press this button to mute the output to the speakers.
Press it again to return to the previous volume level.
i VOLUME control knob
Adjusts the overall sound level. Turning the control
clockwise increases the sound level.
o MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 15)
!0 T-MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
q POWER switch and STANDBY
indicator
When this switch is pressed once, the unit turns ON
and the display is illuminated. When pressed again,
the unit turns OFF and the STANDBY indicator is
illuminated.
w INPUT SELECTOR knob
(AUDIO/VIDEO)
This knob is used to select the input sources. (See
page 11)
e SOURCE DIRECT button
When this button is pressed, the audio signal will
bypass the tone control circuit to provide the pure
sound quality.
In order not to bypass the tone control circuit, press
SOURCE DIRECT button again.
r DIMMER button
When this button is pressed once display is dimmed.
When this button is pressed twice, the display is
turned off and the “DISP” indicator lights up.
Press this button again to turn on the display again.
!1 TUNING/PRESET 34 (UP/DOWN)
button
This button used for tuning in the desired broadcasting
stations or to preset in the desired broadcasting
stations.
!2 BAND button
Press this button to switch between FM and AM in
the TUNER mode.
!3 F (Frequency)/P (Preset) button
During reception of AM or FM, you can change
the function of the UP/DOWN buttons for scanning
frequencies or selecting preset stations by pressing
this button.
!4 PHONES jack for stereo
headphones
Conventional dynamic headphones can be plugged
in here.
Note:
When using headphones, the speaker A and/or B are
switched automatically to OFF and the sound from
the speakers is muted. The speaker A and/or B return
to the previous setting as soon as the plug is removed
from the jack.
TUNING/
PRESET MEMORY
STANDBY
POWER ON/STANDBY
MUTE CLEAR T.MODE DIMMER F/P BAND S.DIRECT
DOWN
VOLUME
UP
INPUT
SELECTOR
RECEIVER SR4023
PHONES
DISP AUTO TUNED ST
SLEEP DIRECT SPKR B
q w e r t
o
u i y
!0 !2 !1 !3 !4
NAMES AND FUNCTIONS
FRONT PANEL