Marantz SR7300N - Manual (Page 29)

26
ENGLISH
5 PL II (PRO LOGIC II) MUSIC PARAMETER
Pro Logic II-Music mode creates a rich and enveloping surround
ambience from stereo sources such as CDs.
In this mode, SR7300 includes three controls to fine-tune the
soundfield as follow.
Select “PRO LOGIC II” in SETUP MAIN MENU with or cursor
button, and press the OK button.
PARAMETER: Select “DEFAULT” or “CUSTOM” with or
cursor button
If you select “CUSTOM”, you can adjust three
parameters as follow
PANORAMA: Select the Panorama mode On or Off with or
cursor button.
Panorama wraps the sound of the front left and
right speakers around you for an exciting
perspective.
DIMENSION: Set the Dimension level between 0 and 6 level in 1
level interval with or cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more suitable
balance from all the speakers with certain
recordings.
CENTER WIDTH: Set the Center width level between 0 and 7 level in
1 level interval with or cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the center is
mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If “None” was selected for the Center speaker
setting in the Speaker size, then this setting will not
appear.
If you finish the setup in this menu, move cursor to “MAIN” with or
cursor buttons and press OK button.
6 CS II (CIRCLE SURROUND II) PARAMETER
1.
Select “CS II” in SETUP MAIN MENU with or cursor button,
and press the OK button.
2.
To Select desired contents as below, press or cursor button
TRUBASS: Set the TRUBASS level between 0 and 6 level in 1
level interval with or cursor button.
TRUBASS produced by the speakers to be an octave
below the actual physical capabilities of the speakers
adding exciting, deeper bass effects.
SRS DIALOG: Set the SRS DIALOG level between 0 and 6 level in 1
level interval with or cursor button.
This can be popped out of the surround audio effects
allowing the listener to easily discern what the actors
say.
If “NONE” was selected for the Center speaker setting
in the Speaker size, then this setting will not appear.
If you finish the setup in this menu, move cursor to “MAIN” with or
cursor buttons and press OK button.
7 MULTI ROOM
SR7300 has some feature to MULTI ROOM SYSTEM as source
selector, OSD information, sleep timer, Multi Room Speaker output
and remote control.
You can set such feature by this sub-menu.
1.
Select “MULTI ROOM” in SETUP MAIN MENU with or cursor
button, and press the OK button.
2.
To Select desired contents as bellow , press or cursor button
MULTI ROOM: To switch on the Multi-room output ON or
OFF, press or cursor button.
VIDEO: Select the video source of the Multi-room
output with or cursor button.
AUDIO: Select the audio source of the Multi-room
output with or cursor button.
VOLUME SETUP: Select whether the Multi-room output level is
variable or fixed with a or cursor button.
VOLUME LEVEL: Adjust the Multi-room output level with or
cursor button.
SLEEP TIMER: SLEEP timer function is available during the
multiroom is active, set the time with or
cursor button.
MAIN ROOM STATUS: Selected input source in the main room will
be displayed.
Notes:
• If “VOLUME” is set to “FIXED”, the multi-room output level
cannot be adjusted from the second zone.
If you finish the setup in this menu, move cursor to “MAIN” with or
cursor buttons and press OK button.
5 P L II MU S I C P ARAME T E R
P ARAME T E R : D E F AU L T
P ANOR AMA : O F F
D I MEN S I ON : 4
C E N T E R W I D T H : 0
MA I N E X I T
6 C S II P A RAME T E R
T RUBA S S : 0
S R S D I A L OG : 0
MA I N E X I T
7 MU L T I ROOM
MU L T I ROOM : O F F
V I D EO : D V D
A UD I O : D V D
V O L UME S E T U P : V AR I AB L E
V O L UME L E V E L : - 9 0 d B
S L E E P T I ME R : O F F
- - - - MA I N - ROOM S T A T U S - - - -
V I D EO : D V D
AUD I O : D V D
MA I N E X I T